Strumenti

Gli strumenti settoriali dell’OiRA qui forniti sono a disposizione delle micro e piccole imprese affinché queste ultime li utilizzino per effettuare valutazioni dei rischi, aiutandole a produrre una valutazione documentata adeguata alle loro esigenze. Gli strumenti si possono scaricare gratuitamente e sono facilmente accessibili facendo clic sul relativo collegamento. Ogni collegamento è accompagnato da una breve descrizione dello strumento e dal nome del partner OiRA che lo ha sviluppato. È possibile effettuare una ricerca degli strumenti per paese, lingua e settore.

Results for ""
Visualizzati 1 - 10 di 14
Immagine
@EU-OSHA

Construction & maintenance

Latvia

Latvian

Construction - Outdoor work

This tool is intended for companies that perform construction work outdoors (e.g. work on roof, insultation works, decoration and restoration of facades). Construction in general is a sector characterised by multiple risk factors, including falling of workers and objects, exposure to dust and fibres, noise, vibration, weather conditions unsuitable for work, work in awkward postures and heavy object lifting and moving. It starts with the identification of hazards and it assesses the level of risk, allowing end-users to choose the most suitable preventive actions to eliminate or reduce the risk(s). The tool also includes safety requirements for scaffolding and personal protective equipment for fall prevention, tips on ergonomics, protection of respiratory system and safe use of work equipment. These allow employees to protect themselves from accidents resulting from falls from heights and, at the same level, to reduce the load for the back and joints, as well as to introduce the main principles of fire protection and so on. This tool is an easy way to improve working conditions for workers in the construction sector and its use can contribute to keep them healthy, motivated and with good work ability.
Immagine

Construction & maintenance

Latvia

Latvian

Construction - Earth works

This tool is intended for companies which perform construction work on the earth level and ground works. Construction in general is a sector characterised by multiple risk factors, including work in excavations, eye and hand injuries, different types of dusts, noise, vibration, work in awkward postures and heavy object lifting and moving. It starts with the identification of hazards and it assesses the level of risk, allowing end-users to choose the most suitable preventive actions to eliminate or reduce the risk(s). The tool also includes safety requirements for excavations, tips on ergonomics, work equipment and personal protective equipment. These allow employees to protect themselves from accidents resulting from falls from heights and, at the same level, to reduce the load for the back and joints, as well as to introduce the main principles of fire protection and so on. This tool is an easy way to improve working conditions for workers in the construction sector and its use can contribute to keep them healthy, motivated and with good work ability.
Immagine

Manufacturing, Working with metal

Latvia

Latvian

Metal works

This tool is intended for companies performing metal works. Typically, occupational health and safety in this sector covers safety aspects caused by work with equipment. However there is more to it. The  sector is characterized by multiple risk factors including different types of dust and fumes, noise, exposure to chemical substances, poor ergonomics including manual lifting of heavy weights and much more. The tool starts It with the identification of hazards and assesses the level of risk, then it allows end-users to choose the most suitable preventive actions to eliminate or reduce risk. Do not forget to implement the proposed preventive measures! The tool includes tips on exhaust ventilation, fire safety, workplace ergonomics, training of workers etc. Proper risk assessment and management will protect employees from risks to their safety and health at work. Using this tool can contribute to keep them healthy, motivated and with good work ability.
Immagine

Public/passenger transport

Latvia

Latvian

Passenger land transport – Taxi drivers

This tool is intended for companies providing taxi services. The sector is characterized by multiple risk factors such as poor ergonomics leading to pain and musculoskeletal disorders, psychosocial aspects like dealing with difficult clients or violence, manual lifting of heavy weights etc. The tool includes tips on how to better prevent employees from the risks identified. It includes tips on reduction of workload and improvement of work organization. It helps reducing accidents at work and enables better prevention against occupational diseases. Using the tool contributes to keeping workers healthy, motivated and with good work ability.
Immagine

Food & beverages manufacture

Latvia

Latvian

Manufacture of food products

This tool is intended for companies processing food. Typically, occupational health and safety in this sector covers safety aspects caused by working with equipment. However, this sector is characterized by multiple risk factors such as: poor ergonomics including poor work postures, repetitive movements, manual lifting of heavy weights, organic dust, chemicals used for cleaning and disinfection etc. The tool includes tips on reduction of workload and improvement of work organization, fire safety, workplace ergonomics etc. It helps reducing accidents at work and enables better prevention against occupational diseases. Using the tool contributes to keep workers healthy, motivated and with good work ability.
Immagine

Construction & maintenance

Latvia

Latvian

Construction - Indoor work

This tool is intended for companies which perform construction works indoors. This sector is characterised by multiple risk factors, including work at height, hand injuries, different types of dusts, various harmful effects of chemical substances, noise, work in awkward postures and heavy object lifting and moving. It starts with the identification of hazards and it assesses the level of risk, allowing end-users to choose the most suitable preventive actions to eliminate or reduce the risk(s). The tool also includes tips on ergonomics, work equipment and personal protective equipment. These allow employees to protect themselves from accidents resulting from falls from heights and, at the same level, to reduce the load for the back and joints, as well as to introduce the main principles of fire protection and so on. This tool is an easy way to improve working conditions for workers in the construction sector and its use can contribute to keep them healthy, motivated and with good work ability.
Immagine

Construction & maintenance

Slovenia

Slovenian

Painters

The tool is meant for indoor painters and façade workers, with tasks like painting walls and ceilings, painting of carpenter products, setting wallpapers and insulation, decoration of advertisement spaces and boards, primary protection of products: wood against moist and decay, metal against rust. They work with gear/equipment like paintbrushes, cutting tools, etc. Inside, the risk is drought. Outside, painters and façade workers are exposed to the weather based risks. They often can't avoid filth, foul smell, and toxic paint fumes. Work is usually done standing up or on a ladder. That makes additional risks. The work can be one person or a group, often with longer working hours. The danger is working with toxic substances. The purpose of the online tool OiRA for painters and façade workers is for employees and employers to remind each other of dangers, collaborate, and give each other advice to make a safer workplace for employees.  
Immagine

Construction & maintenance

Slovenia

Slovenian

Parquet workers

This risk assessment has been produced in order to assist parquet workers to do their job safely. Parquet workers tasks relate to the flooring laying and other floor coverings made of wood and wooden materials. A parquet worker uses a number of tools and equipment such as hammers, saws, rotating drums and the circular grinding machines and a vacuum cleaner which all pose several risks. An interactive OiRA tool intended for parquet workers comprises a basic description of hazards in the workplace. It encourages cooperation between employees and employers and significantly contributes to improvements in the workplace and working environment.
Immagine

Working with metal

Slovenia

Slovenian

Metal workers

This risk assessment has been produced in order to assist metalworkers to do their job safely. Metal workers are exposed to different hazards like mechanical hazards, extreme temperatures (liquid metal), recurring tasks, lifting heavy loads, the dangers of airborne particles, the risk of electrocution, frequent slips and falls. They are exposed to the hazardous substances and biological agents. An interactive OiRA tool for metalworkers comprises a basic description of the risks to which metal workers are exposed during their work. With this and the proposed measures to reduce risks, the OiRA tool for metal workers encourages cooperation between employees and employers. This OiRA tool was designed to promote health in the workplace, with the combined efforts from employers, workers and society as a whole to improve the health and well-being in the workplace. Employers are responsible for its implementation. 
Immagine

Construction & maintenance

Slovenia

Slovenian

Roofers

This risk assessment has been produced in order to assist those who have a legitimate need to access and/or work on a roof to do so safely. Roofers' basic work activity is to cover roofs with various roofing materials. Their work varies depending on whether they cover the roof on anew building, which is still under construction, or they replace the roof on an existing building. The main risk to which the roofers are constantly exposed is to fall off the roof. An interactive OiRA tool for roofers comprises a basic description of the risk posed to the roofer. With this and the proposed measures to reduce the risk, the OiRA tool encourages cooperation between employees and employers. The OiRA tool for roofers brings the description and identification of the general risks involved in carrying loads, working at heights, on job sites documents for work and so on. Additional modules are about working at heights and roof treatment while working at height, roof work, work on the roof with a slopes greater than 60° and the roofs with the non-load bearing roof structures.