Strumenti

Gli strumenti settoriali dell’OiRA qui forniti sono a disposizione delle micro e piccole imprese affinché queste ultime li utilizzino per effettuare valutazioni dei rischi, aiutandole a produrre una valutazione documentata adeguata alle loro esigenze. Gli strumenti si possono scaricare gratuitamente e sono facilmente accessibili facendo clic sul relativo collegamento. Ogni collegamento è accompagnato da una breve descrizione dello strumento e dal nome del partner OiRA che lo ha sviluppato. È possibile effettuare una ricerca degli strumenti per paese, lingua e settore.

Results for ""
Visualizzati 1 - 10 di 10
Immagine

Construction & maintenance

Portugal

Portuguese

Rehabilitation and refurbishment of buildings

Immagine

Construction & maintenance

Portugal

Portuguese

Construction

The building construction sector which is mainly made up of micro and small companies registers high levels of work accidents. This sector is characterized by several risk factors, such as working at heights, moving loads, handling machinery and work equipment, the presence of dust and other hazardous chemicals, improper posture, noise and vibration, as well as adverse weather conditions. Accidents usually occur due to unsafe conditions and / or actions. This tool aims to contribute to an improvement of working conditions in the building construction sector, as it allows for an assessment of existing risks and suggests measures to be implemented to control these risks and produces an action plan to be implemented at the workplace.
Immagine

Construction & maintenance

Slovenia

Slovenian

Painters

The tool is meant for indoor painters and façade workers, with tasks like painting walls and ceilings, painting of carpenter products, setting wallpapers and insulation, decoration of advertisement spaces and boards, primary protection of products: wood against moist and decay, metal against rust. They work with gear/equipment like paintbrushes, cutting tools, etc. Inside, the risk is drought. Outside, painters and façade workers are exposed to the weather based risks. They often can't avoid filth, foul smell, and toxic paint fumes. Work is usually done standing up or on a ladder. That makes additional risks. The work can be one person or a group, often with longer working hours. The danger is working with toxic substances. The purpose of the online tool OiRA for painters and façade workers is for employees and employers to remind each other of dangers, collaborate, and give each other advice to make a safer workplace for employees.  
Immagine

Construction & maintenance

Slovenia

Slovenian

Parquet workers

This risk assessment has been produced in order to assist parquet workers to do their job safely. Parquet workers tasks relate to the flooring laying and other floor coverings made of wood and wooden materials. A parquet worker uses a number of tools and equipment such as hammers, saws, rotating drums and the circular grinding machines and a vacuum cleaner which all pose several risks. An interactive OiRA tool intended for parquet workers comprises a basic description of hazards in the workplace. It encourages cooperation between employees and employers and significantly contributes to improvements in the workplace and working environment.
Immagine

Construction & maintenance

Slovenia

Slovenian

Roofers

This risk assessment has been produced in order to assist those who have a legitimate need to access and/or work on a roof to do so safely. Roofers' basic work activity is to cover roofs with various roofing materials. Their work varies depending on whether they cover the roof on anew building, which is still under construction, or they replace the roof on an existing building. The main risk to which the roofers are constantly exposed is to fall off the roof. An interactive OiRA tool for roofers comprises a basic description of the risk posed to the roofer. With this and the proposed measures to reduce the risk, the OiRA tool encourages cooperation between employees and employers. The OiRA tool for roofers brings the description and identification of the general risks involved in carrying loads, working at heights, on job sites documents for work and so on. Additional modules are about working at heights and roof treatment while working at height, roof work, work on the roof with a slopes greater than 60° and the roofs with the non-load bearing roof structures.
Immagine

Leather & tanning

Portugal

Portuguese

Leather and tanning

The processes and activities in the leather and tanning industry can expose workers to a broad variety of occupational hazards. The most important risks are related to the use of machinery and other equipment such as knifes, dealing with dangerous chemicals, and being exposed to risks related to the general work environment, such as slippery floors etc. The tool helps employers to identify the specific risks in their company. In addition it guides the user not only through the risk identification but also helps in setting up an action plan to eliminate or mitigate the identified risks by proposing plenty of practical solutions. 
Immagine

Construction & maintenance

Slovenia

Slovenian

Construction

From the occupational safety and health perspective, working in the construction industry is among the most risky. The reasons are mainly based on the fact that the work is performed at the work environment where the situation is constantly evolving in terms of both the performance of work activities, the number of participants, work at different levels (at height, excavations, tunnels), transport (horizontal, vertical) as well as in very changing weather conditions (heat, cold, wind, rain, snow). During construction work, workers are exposed to health damage risks, such as diseases related to asbestos exposure, back pain, vibration disease (white finger syndrome), and skin ulcers due to the use of hazardous substances like cement. The OiRA tool for construction workers deals with general risks with an emphasis on chemical safety and the safety of work equipment, slipping, tripping, falls from heights, exposure to dangerous substances, the risk of electrical current, manual handling of loads, stress, violence and so on. This risk assessment contains proposed solutions to reduce or eliminate the risks. All requirements, listed in the OiRA tool, are linked to legislation.
Immagine

Construction & maintenance, Woodworking & related activities

Slovenia

Slovenian

Carpentries

The woodworking industry has one of the highest rates of accidents in the manufacturing sector. The reasons are largely the result of workers interacting with various sets of tools and equipment. Carpenter work requires normal physical and mental capability with an emphasis on skills of hands and fingers, muscle sensitivity and pressure sensation on feet, hands and fingers. Carpenters work with the coordination of hands and fingers and must be able to concentrate in dangerous situations with a rapid understanding and reaction to signals and sounds. Occasionally, they work at height and in forced positions. Because of the potential harm caused by excessive noise, dust, fumes, glues, paints, thinners and hardeners periodic medical check-ups are required. The OiRA tool for carpenters deals with general risks with an emphasis on chemical safety and the safety of work equipment - machinery and equipment (maintenance of machines, control systems, etc.). This risk assessment contains proposed solutions to reduce or eliminate the risks. All requirements, listed in the OiRA tool, are linked to legislation.
Immagine

Leather & tanning

Spain

Spanish

Leather and tanning

Tanneries have important risks that must be controlled to ensure the protection of workers. These risks are of various types such as: the use of heavy machinery, the use of manual cutting tools or chemicals during tanning and bleaching. Workers often have to manually manipulate skins and hides and the workplace and storage area is often wet. The European social partners in the field of leather and tanning, IndustriAll and COTANCE, developed this tool that has been adapted to Catalan, as support for small and medium companies.
Immagine

Leather & tanning

Spain

Catalan

Leather and tanning

Tanneries have important risks that must be controlled to ensure the protection of workers. These risks are of various types such as: the use of heavy machinery, the use of manual cutting tools or chemicals during tanning and bleaching. Workers often have to manually manipulate skins and hides and the workplace and storage area is often wet. The European social partners in the field of leather and tanning, IndustriAll and COTANCE, developed this tool that has been adapted to Catalan, as support for small and medium companies.